M11 – 008-062   Water Pump

Table of Contents

Maintenance Check

Maintenance Check

TOC

Check the water pump body for indications of water leakage at the weep hole. Reference the appropriate engine application for maintenance interval.

If a steady flow or drip of coolant or oil is observed at the weep hole, replace the water pump with a new or rebuilt unit. Refer to Procedure 008-062 (Water Pump) in Section A.

NOTE: A streak or chemical buildup at the weep hole is not justification for water pump replacement.

SMALL | MEDIUM | LARGE


Make sure the weep hole is open.

NOTE: A small screwdriver or a similar tool can be used to remove any debris.

SMALL | MEDIUM | LARGE
Last Modified:  10-Dec-2004