M11 – 100-001   Engine Identification

Engine Dataplate

TOC

The engine dataplate shows important facts about your engine. The engine serial number and control Parts List (CPL) provide data for ordering parts and service. The engine dataplate must not be changed unless approved by Cummins Inc.

The dataplate is located on the fuel pump side of the engine, on the rocker housing. Have the following engine data available when communicating with a Cummins Authorized Repair Location.

 
SMALL | MEDIUM | LARGE

SMALL | MEDIUM | LARGE

The following information on the dataplate is mandatory when sourcing service parts:

  1. Engine serial number (ESN)
  2. Model
  3. Horsepower and rpm rating.
  4. Control Parts List (CPL)
  5. Important engine information.

ECM Dataplate

TOC

NOTE: The ECM referenced here is used with the CELECT™ and CELECT™ Plus fuel systems only.

There are two dataplates on top of the ECM.

The dataplate on the left contains the part number (P/N), serial number (S/N), and date code (D/C) of the ECM.

The dataplate on the right contains the engine serial number (ESN), fuel code (FC), and engine calibration information.

 
SMALL | MEDIUM | LARGE
   

Fuel Pump Dataplate

TOC

NOTE: The fuel pump dataplate referenced here is the style of dataplate used on a Cummins PT® fuel pump. This is the type of fuel pump used on an STC fuel system. It is not used on CELECT™ Plus fuel systems.

The fuel pump dataplate is located on the top of the fuel pump. It provides information for fuel pump calibration.

 
SMALL | MEDIUM | LARGE
   

Cummins® Engine Nomenclature

TOC

The Cummins engine nomenclature provides the data as illustrated in the illustration for the CELECT™ Plus fuel system.

 
SMALL | MEDIUM | LARGE
   

STC


The following letters designate some of the different market applications for a Cummins engine.

  • A = Agriculture
  • C = Construction
  • G = Generator drive
 
SMALL | MEDIUM | LARGE
Last Modified:  16-Nov-2004