M11 – Coolant Temperature Below Normal

Symptom Tree  

Electronic fault codes are active

For instructions on how to read active fault codes, refer to Procedure 101-007 (Electronic Controlled Fuel System) in Section 1. If fault codes are active, contact a Cummins Authorized Repair Facility.

 

Engine is operating at low ambient temperature

Check the winterfront, shutters, and under-the-hood air. Use under-the-hood intake air in cold weather. Refer to Procedure 101-015 (Operating the Engine) in Section 1.

 

Radiator shutters are stuck open or opening early

Check the shutter operation. Repair or replace the shutters if necessary. Refer to Procedure 101-015 (Operating the Engine) in Section 1 and OEM service manual.

 

Coolant temperature gauge or sensor is malfunctioning

Test the gauge and the sensor. Repair or replace, if necessary. Refer to the OEM service manual.

 
Contact a Cummins Authorized Repair Facility

Last Modified:  18-Nov-2004