M11 – 101-009   Engine Shutdown

Table of Contents

General Information

General Information

TOC

Allow the engine to idle 3 to 5 minutes before shutting it off after a full-load operation. This allows adequate cool down of pistons, cylinders, bearings, and turbocharger components.

Turn the ignition switch to the OFF position. If the engine does not shut down, refer to Troubleshooting Symptom (Section TS) in appropriate Operation and Maintenance manual.

 CAUTION 

Failure to follow the correct shutdown procedure may result in damage to the turbocharger and shorten the turbocharger life.
 
SMALL | MEDIUM | LARGE
Last Modified:  15-Jul-2010